|
It's
important to have the proper air pressure in your tires, as underinflation may
lead to tire failure. The right amount of air for your tires is specified by the
vehicle manufacturer and is shown on the vehicle door edge, door post, glove box
door or fuel door. It is also listed in the owner's manual.
1. When you check the air pressure, make sure the tires are
cool - meaning they are not hot from driving even a mile. (NOTE:
If you have to drive a distance to get air, check and record the tire pressure
first and add the appropriate air pressure when you get to the pump. It is
normal for tires to heat up and the air pressure inside to go up as you drive.
Never "bleed" or reduce air pressure when tires are hot.)
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the
metal stem in the center of the valve with a fingernail or the tip of a pen.
Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare. (NOTE:
Some spare tires require higher inflation pressure.)
8. Visually inspect the tires to make sure there are no
nails or other objects embedded that could poke a hole in the tire and cause an
air leak.
9. Check the sidewalls to make sure there are no gouges,
cuts, bulges or other irregularities. NOTE: Air pressure in a
tire goes up (in warm weather) or down (in cold weather) 1-2 pounds for every 10
degrees of temperature change. |
